All Emperor2011's Software in one thread !! (updated daily)

This build is for all PC and Laptops..it is Decrapped..and themes&icons are added!,Everything will work here..i didnt have any problems with drivers or programs.

Build Informations
Nothing to do during installation
Microsoft accound bypassed
Power Plan set to High Performance
Tweaks applied for extreme performance, Responsiveness, and Resource Savings in all sections

Programs
NO PROGRAMS ON THIS BUILD

System Requirements
Processor: 2 gigahertz (GHz) or faster.
RAM: 2 gigabyte (GB).
Free space on hard disk: 30 gigabytes (GB).
Graphics card: DirectX 9 graphics device or a newer version.
Additional requirements to use certain features.
To use touch you need a tablet or monitor that supports multitouch.
To access the Windows store to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768 pixels

HOMEPAGE:

PEACH - Polymetric Arpeggiator. PEACH takes arpeggiation far beyond the classic up/down cycle. Instead of forcing every lane to share the same step length, PEACH lets you set independent lane lengths, turning simple chords into evolving, meter-shifting patterns.

It follows the same streamlined, effective design philosophy as our polymetric sequencers SEQUND and POLYLLOP: clear controls, immediate results, and deep creative potential. PEACH also pairs beautifully with them, opening up even more complex sequencing and arpeggiation possibilities when combined.

Whether you're sketching ideas, experimenting, or performing live, PEACH gives you an organic, hands-on arpeggiation workflow unlike anything else.

Key Features
Polymetric Lanes - Each lane (Gate, Hold, Octave, Velocity, MIDI CC) has its own step count for shifting interplay.

Advanced Note Control - Define order, latch, octave range, gate length, swing, and step advance modes globally.

Scale Quantize - Snap to factory or custom scales, or leave chromatic for free exploration.

Creative Randomization - Dice buttons and step-locking give you instant variation with musical control.

Performance-Ready - Store up to 12 patterns per preset and switch them instantly via MIDI. Host-visible parameters can be mapped to a controller or automated directly in your DAW.

Expressive MIDI CC Lanes - Sequence up to three assignable MIDI parameters (e.g., filter cutoff, decay, resonance).

Built for Workflow - Undo/redo, preset management, and scalable lanes keep you moving smoothly and creatively.

Whats New
Updates: official site does not provide any info about changes in this version

HOMEPAGE:

AI Dream Art - Create Stunning AI-Generated Art Offline. Unleash your imagination and generate breathtaking AI art right on your desktop - with zero internet dependency. AI Dream Art is your private, offline creative studio powered by a local diffusion model. No sign-ups, no cloud processing, and no usage limits.

- Create multiple images (up to 4) per prompt in one click
- Supports multiple image resolutions (512x512 to 1024x1024)
- Optimized for systems with NVIDIA GPUs & CUDA support
- 100% offline - your data never leaves your machine
- No AI model downloads required - everything is bundled
- Smart enhancement options: toggle styles like "high detail," "cinematic lighting," and more
- Auto-save to your chosen folder with unique filenames

Whether you're an artist, designer, storyteller, or just exploring the world of AI, AI Dream Art gives you full control, privacy, and creative flexibility - all without the cloud.

Features
- Create multiple images (up to 4) per prompt in one click
- Supports multiple image resolutions (512x512 to 1024x1024)
- Optimized for systems with NVIDIA GPUs & CUDA support
- 100% offline - your data never leaves your machine
- No AI model downloads required - everything is bundled
- Smart enhancement options: toggle styles like "high detail," "cinematic lighting," and more

System Requirements
- OS: Windows 10 version 17763.0 or higher
- DirectX: Version 11 (Minimum), DirectX 12 API, Hardware Feature Level 12 (Recommended)
- Memory: 8 GB (Minimum), 16 GB (Recommended)
- Video Memory: 2 GB (Minimum), 6 GB (Recommended)

Recommended
- 16 GB RAM or more
- NVIDIA GPU with CUDA (e.g., RTX/GTX 10XX or newer)
- Python and Torch with CUDA installed (the app detects and uses them automatically if present)

Minimum Requirements
- 8 GB RAM
- CPU-only mode is supported but may take 10-60 minutes per image depending on system specs

Microsoft StorFull Version

Cataclysm is a signal destruction machine from a paranoid time. Inspired by malfunctioning test equipment, illegal wiretaps, and classic analog hardware, Cataclysm brings chaotic circuitry into the digital age.

Includes
Central Drive module with in-depth waveshaping, gating, and tone controls
Tone Circuitry module including unfaithful approximations of three classic guitar amps
Time-domain Pitch Shifter with two independent voices
Lofi Looper with three Recording Mediums (Tape, BBD, Data) and adjustable quality
Hum low-frequency drone oscillator
Stereo Chorus module with bass frequency preservation and 4 waveshapes
Amplitude Modulation module with 4 waveshapes for tremolo and ring mod effects
Envelope Follower module that can modulate Drive, Resonator, and Hum modules
Delay-Based Stereo Resonator module with tunable resonant pitch
Stereo Delay module with three Recording Mediums (Tape, BBD, Data)
Global Mix control
Instructional computer display for built-in operational assistance
Custom preset system with 92 factory presets declassifying Cataclysm's signal processing

What's New
official site does not provide any info about changes in this version.

HOMEPAGE:

AnyDesk is a comprehensive software solution that was developed to provide you with an alternative means of remotely accessing a computer, enabling you to work with various files and documents from afar.

Straightforward and intuitive looks
The utility features a very practical and easy to understand appearance, which makes it quite approachable for anyone, regardless of the level of prior experience with similar tools.
The main window allows you to connect to another machine running AnyDesk, just by inputting the corresponding address into the 'Remote Desk' field.
Swiftly connect to one or several remote computers
The application aims to help you connect to the home PC from work, or the opposite, enabling you to easily access the documents that you need, whenever you want, without them ever leaving the safety of that particular disk. For this reason, AnyDesk does not feature a file sharing or transfer function.
Nonetheless, the utility lets you to share the clipboard contents between the two machines, making it simple to copy and paste information from one to the other. Similarly, it allows you to take screenshots of the computer you connect to, saving them on your desktop to PNG format.
AnyDesk supports unattended access, making it possible to connect to the target PC without the need for confirmation on the other side. This however, requires you to set a password, in order to make sure no unwanted access occurs.
For each connection, a set of permissions can be activated or deactivated, for instance the ability to hear the sound output, control or lock the keyboard and mouse or access the clipboard. In addition, various other display preferences can be adjusted.
A handy RDP tool
Overall, AnyDesk proves to be a handy and reliable program that can successfully assist you in remotely connecting to other PCs, allowing you to access and control the targeted computer, with a minimal level of effort.

HOMEPAGE:

Application Blocker is a software restriction tool for Windows. It can block access to selected programs.

It is very effective and easy to use. You can select any program file and add it to the list.
The lock is reliable and very hard to break for normal users.
Application Blocker does not work at background so it does not affect your computer's performance.
This program can be used to control your chield or prevent access to programs on special areas like school computers.
You can set an UI password to prevent unauthorized users from blocking and unblocking programs.
The tool can check for updates automatically and alert you when a new version is available. It can automatically download and install newer versions.

Features
Block Apps
Parental Controls
Application Blocker
Password Protected
Application Restrictor
Restrict Programs

HOMEPAGE:

Ashampoo Backup Pro 27 takes the fear out of viruses, ransomware, and hardware errors! Experience an easy to use well-designed but powerful backup solution. The new Ashampoo Backup Pro offers you all possible storage options: Back up single files or entire partitions to local drives or online storage providers. Backup software couldn't get any easier. Just plug in a storage device and you're good to go! In addition, the program is light on resources, gets out of your way and does all the heavy lifting in the background. Restoring your backups is super easy! Ashampoo Backup Pro even comes with a bootable rescue system to restore your system in the event of major system failure!

Helps with
Malware infections
Hard disk failure
Accidentally deleted files
Operating system issues
Troublesome updates
Device theft

Faster backups-local or cloud
Improved performance no matter the storage location
Ashampoo Backup Pro stands for maximum security-and now also speed. Cloud backups are up to 30% faster than before, and file-based backups also benefit from noticeably improved performance.

Instant access to all popular providers and storage methods
Cloud storage has long been a secure way of backing up your data. As cloud providers keep advancing their services and storage methods, so do we: Ashampoo Backup Pro has been fully updated to support the latest and most secure online data transfer methods! Back up your data to Dropbox, OneDrive, Google Drive, OneDrive Business / Office 365, Owncloud, Telekom MagentaCLOUD, Strato, 1&1 and many others.



HOMEPAGE:

20 years ago, beautiful photos were scarce. 10 years ago, memory was scarce. Today, we've got both-but we've also got a veritable file chaos, thanks to hundreds of files! Ashampoo Photo Commander 19 not only turns chaos into neat photo collections but it also turns good into great shots, and can even make collages, greetings cards, and slideshows. Convert your photos, even automatically and in batches, add watermarks, and sort your files by location for instant visual clarity. Photo Commander is the all-in-one solution for you!

Ashampoo Photo Commander is back!
A modern technology overhaul for a classic
Ashampoo Photo Commander 19 eliminates duplicate images using four techniques simultaneously! Experience a new, adaptive screen layout, significantly improved photo browsing speed, and powerful new formats! Instantly see where photos were taken, apply new effects, and use XMP and EXIF data for quick filtering! With handy new switches and an interface designed to support your workflow, you'll experience Ashampoo Photo Commander like never before!

Automatic duplicate photo filter for quickly finding and grouping duplicates
Four-way fingerprinting for precise image comparison and duplicate detection
Auto-adaptive UI layout for portrait or landscape orientation
Faster thumbnail loading, including subfolders
Progress display for running tasks
Auto-listing of city names in GPS data in group view
Filter by favorites, duplicates, and file formats in real time
Support for XMP and EXIF data in filters
Faster folder scans
Customizable folder view and UI elements
Up to 50% faster PNG load times
Support for SVG, AVIF, and the latest RAW formats
New effects like Bevel, Inner Glow, and Pseudo 3D
Right-click bitmap export for objects
New Pop Art, color, and artistic frame effects
New "Change Color" tool for easy color adjustment
Uniform design with updated dialogs and new controls
Improved full-screen mode with new transition effects
Faster display and zoom for 32-bit photos with alpha channel
Optimized video playback with slow drives

Find duplicates, edit metadata, smart-search for files
No more duplicate photos - with four-way fingerprint technology
Ashampoo Photo Commander is handy indeed! It scans your library for duplicates and helps you filter your photos by name, EXIF/IPTC data, or comments. Looking for a needle in a haystack has just become super-easy. You can even add missing metadata manually so you'll never lose track of your photos again!

Collages, cards and frames included
From birthdays to Christmas: Create just the right card in no time
Get creative: Photo Commander lets you create stylish collages and elegant cards with the help of numerous included templates. Add nifty frames to your photos and combine images and texts to create greeting cards for holidays, parties, and special occasions.

Crop and edit photos
Beginner or professional user: Make the most of your shots
Crop your photos with ease, straighten image horizons and accentuate colors. Cut out individual people and objects and modify image perspective at your convenience. Play with numerous great photo effects and go professional with gradation curves and tonal value correction! Whether quick fix or detailed post-processing: Ashampoo Photo Commander has got you covered!

The image viewer with the perfect overview
Smart-group and sort by capture date, time, or file name
With Ashampoo Photo Commander, you always stay on top of your photos. Clever filters and grouping options help you keep track no matter how large your photo collections are! Sort chronologically, thematically and by location or apply custom filters and instantly find every shot!

Design slideshows with ease
Create high-res slideshows with music
Create high-resolution 4K slideshows with fitting transitions and underline your shots with music in various formats. Finished projects are instantly previewable with the new video playbar and can be burned to disc straightaway.

Auto-enhance your photos
Smart algorithms for better colors or contrasts and less noise
Even underwhelming shots turn into precious vacation memories thanks to image auto-correction. Remove scratches and eliminate image noise or red eyes instantly! Auto-correction does most of the heavy lifting for you-even in batch processing mode so you can polish your entire library in one go! Optimize colors or contrasts and get rid of compression artifacts at the click of a button!

Present your photos in style
Versatile presentation mode for every occasion
Whether you're enjoying your photos on your own or with friends and family, the new presentation mode is simply genius-especially in multi-display environments. You control the presentation on one display and your viewers get to enjoy the results on another, e.g. a video projector. You can even make live adjustments without leaving the presentation!

Apply geotags
No more confusion about shooting locations
Modern cameras and cellphones use geotagging to save location information along with each shot. Ashampoo Photo Commander not only uses these tags for sorting but can also edit and create them. You'll get precise information down to street level! Want to see all photos from Paris? No problem. You can even view each location in Google Maps instantly!

A real feature beast for your photos
20 years in the making-and it shows!
Ashampoo Photo Commander includes over 200 photo-related functions and is rightly called "feature beast" by its fans. And it's true: You can click your way through he program and keep discovering new handy features and tools that other companies would gladly sell you as separate apps. Your fun journey into the world of photo editing begins today!

Salvage or create
Breathe new life into bad shots or create stunning panoramic pictures
Not every shot is a hit! Photo Commander includes a special auto-feature that fixes overexposed or washed out colors with great results. You can also apply effects individually to add more vibrancy and structure to your shots, or combine them into breathtaking panoramic views.

Batch-processing done right
Process entire photo libraries in one go
Convert multiple images into different formats at once and adjust image size and aspect ratio in the process. Add watermarks or frames to your photos and rotate or mirror them to your needs. Modify brightness and contrast settings or eliminate image noise. You can do all that with batch-processing and save loads of time and effort!

Fast multi-purpose image editing
A quick fix for common image issues
Discover tools that optimize your photos, add filters and polish contrasts and colors. Straighten image horizons, clone areas, and accentuate details with the focus or tilt-shift effect. Adjust image size and rotation or crop your photos perfectly. Why buy several programs when you can just get the one that does it all in a single interface?

Helpful wizards
Step-by-step guidance
Ashampoo Photo Commander comes with multiple wizards that offer step-by-step assistance for various tasks. Whether you're designing a calendar, creating a collage, or batch-processing hundreds of photos, there's a wizard that will guide you through the process, no previous knowledge required. Pick your photos, select an option, and you're good to go!

Full Windows 11 compatibility and 64-bit support
Maximum performance for all current Windows versions
Ashampoo Photo Commander is not only Windows 11 compatible but has also been completely overhauled for true native 64-bit support and optimal memory management. It's the best-looking, fastest, and most stable Photo Commander yet. Whether you're editing single images or entire libraries, you'll feel the difference right away!



HOMEPAGE:

NEW IN VERSION 2
New User Interface
The user interface has been cleaned up, modernized, and given panels for clarity and to accommodate new controls.

Modulation Assignment Reworked
We have replaced the matrix mod assign panel with a right-click context menu like those found in Continua and Phosphor 3. In addition, the controls now have indicators to show modulation.

Additional VA Oscillator
Quanta 2 has two virtual analog oscillators instead of the single one in the original. Use one for a sub bass, send both to the grain engine, granularize one and leave the other normal -- whatever floats your boat!

Root Note Detection And Assignment
When you drop a sample on Quanta 2, or load it via the import dialogue, Quanta 2 attempts to find the root note of the sample. (This obviously works better on legato single notes than it does on chords or full music loops.) After the import, you can adjust the root note to taste.

Grain Pitch Quantization
You can optionally limit grain pitches to particular notes. This quantizing is post-modulation, so any randomization or mod applied to grain tuning will be quantized to the scale of your choosing. Quantizing respects the tuning table or MTS-ESP tuning as well.

Effects
Quanta now has a chorus, stereo dual delay, and reverb taken from the Audio Damage library of studio effects.

New Modulation Features
The envelope generators and LFOs have been extensively improved. The FEGs pick up amplitude and time scale knobs, and the FLFOs get amplitude control, switchable bipolar output, and a sync switch which causes FLFO 2 to reset whenever FLFO 1 restarts. In addition, four Macro knobs have been added to the modulation panel, and these can receive a global MIDI CC assignment, thus allowing you to control the macros from the MIDI controller of your choice, no matter what the author of the preset chose.

Quanta 1 Preset Loading
Quanta 2 contains every preset from Quanta 1, and every post-release pack we have commissioned, as well as new preset packs from Red Means Recording and Red Sky Lullaby, and created in house. In addition, Quanta 2 will load any preset created for Quanta 1. If you have made presets for Quanta 1, just drag the folder in to the Quanta 2 preset user folder, and they will appear in Quanta 2 ready to go to work.

FEATURES

- Multi-Format Sample Loader\
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine\
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators\
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source\
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters\
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4\
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2\
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold\
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu\
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset\
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)\
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings\
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets\
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format\
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI\
Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.

FORMATS

VST3 64-bit AAX 64-bit
Windows 10 or newer and a 64-bit DAW.

VST3 64-bit AAX 64-bit AudioUnit 64-bit
Universal Binary 2 for Intel/M1 macOS 10.12 or newer and a 64-bit DAW.

VST3 64-bit
Ubuntu 20 or later and a 64-bit DAW. (Verify the demo works for you before purchasing! If the demo works, the full version will.)

What's New
official site does not provide any info about changes in this version.

HOMEPAGE:

Equal parts workhorse and abstract creative tool, Circa is a six track multi-layer looping environment that can do most of the things your popular floor pedal looper can while also paying homage to the serendipitous world of ambient looping.

Each layer can sync to the host, a master loop, or free run, and can be triggered in sync, with an audio signal, or freely. Circa has seven stereo outputs (including a dedicated cue output for monitoring) and built-in reverb and delay. Add in a complete MIDI control system and Circa is a full looping workstation.

What's New
official site does not provide any info about changes in this version.

HOMEPAGE:

Ascent is a sophisticated dual-reverb plugin that combines two powerful algorithms into one fluid interface: a lush, expansive hall reverb and an innovative pitch-shifting particle reverb that creates evolving, granular shimmer effects. Layer spacious, long-decay reverbs with dynamic pitch-shifted textures to craft everything from subtle ambient spaces to dramatic, otherworldly atmospheres. With intuitive controls, and built-in dynamic ducking that keeps your mix clean, Ascent delivers the acoustic character and creative possibilities of premium hardware reverbs in a streamlined, CPU-efficient plugin that works seamlessly across all major formats and platforms.

What's New
official site does not provide any info about changes in this version.

HOMEPAGE:

Batch Access Database Compactor is an Access DB Compact, Access Database Compactor that compact and repair access database easily. Batch Access Database Compactor can compact and repair Access Database without Office installed.

Batch Access Database Compactor supports project and command line. Batch Access Database Compactor has a friendly GUI so it is used very easily. Batch Access Database Compactor Drag and Explorer Context supported.

Batch Access Database Compactor supports an efficient Multi-Thread compress engine. So you could control the compress action very easily. You can stop or pause and continue it in any time.

You can save your compack and shrink work in a project file (.batch-axeszip) for re-use. You can run the batch-axeszip project in Microsoft Windows Explorer or command line directly.

The main features of Batch Access DB Compactor
Compact and repair Access database easily.
Batch compress access mdb with GUI that supports powerful search function.
Supports compact and shrink a mdb/accdb file.
Supports compress mdb/accdb files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread compress engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch CHM TO DOC Converter is a CHM to Word Doocument Batch Converter that can convert HTML Help to Word DOC and DOCX easily. Batch CHM TO DOC Converter supports powerful search for a lot of files. A Compressed HTML Help converter for Windows.

Batch CHM TO DOC Converter supports project and command line. Batch CHM TO DOC Converter has a friendly GUI so it is used very easily. Batch CHM TO Word DOC Converter Drag and Explorer Context supported.
Batch CHM TO DOC Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-chm2doc) for re-use. You can run the batch-chm2doc project in Microsoft Windows Explorer or command line directly.

The main features of Batch CHM to Word Converter
Convert Compiled HTML Help (CHM) to Word DOC easily.
Batch convert CHM to DOC with GUI that supports powerful search function.
Supports convert a chm file.
Supports convert chm helps in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch CHM TO PDF Converter is a CHM to PDF Doocument Batch Converter that can convert HTML Help to PDF document and file easily. Batch CHM TO PDF Converter supports powerful search for a lot of files. A Compressed HTML Help converter for Windows.

Batch CHM TO PDF Converter supports project and command line. Batch CHM TO PDF Converter has a friendly GUI so it is used very easily. Batch CHM TO PDF Converter Drag and Explorer Context supported.
Batch CHM TO PDF Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-chm2pdf) for re-use. You can run the batch-chm2pdf project in Microsoft Windows Explorer or command line directly.

The main features of Batch CHM to PDF Converter
Convert Compiled HTML Help (CHM) to PDF file easily.
Batch convert CHM to PDF with GUI that supports powerful search function.
Supports convert a chm file.
Supports convert chm helps in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch DOC TO CHM Generator is a Help Authoring Tool that can convert Word DOC to CHM HTML Help and Manual automatically. Batch DOC TO CHM Generator supports powerful search for a lot of files. An easy-use Word to CHM, Doc to Help & Manual Converter. Batch DOC TO CHM Generator supports project and command line. Batch DOC TO CHM Converter has a friendly GUI so it is used very easily. Batch DOC TO CHM Generator Drag and Explorer Context supported.

Batch DOC TO CHM Generator supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.

You can save your conversion work in a project file (.batch-doc2chm) for re-use. You can run the batch-doc2chm project in Microsoft Windows Explorer or command line directly.

The main features of Batch DOC to Help Generator
Convert Word DOC to CHM HTML Help and Manual automatically.
Batch convert DOC to CHM with GUI that supports powerful search function.
Supports convert a doc/docx file.
Supports convert doc/docx files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

The KEYWORDS of Batch DOC to Help Generator
doc to chm, docx to chm, word to chm, doc to help, help authoring tool, word to help, doc to chm converter, chm maker, chm creator

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch DOC TO TXT Converter is a Word to TXT, DOC/DOCX to TXT Batch Converter that can convert Word DOC/DOCX to Text easily. Batch DOC TO TXT Converter supports powerful search for a lot of files. A TXT publisher for Word.

Batch DOC TO TXT Converter supports project and command line. Batch DOC TO TXT Converter has a friendly GUI so it is used very easily. Batch DOC TO TXT Converter Drag and Explorer Context supported.
Batch DOC TO TXT Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-doc2txt) for re-use. You can run the batch-doc2txt project in Microsoft Windows Explorer or command line directly.

The main features of Batch Word to Text Converter
Convert Word DOC/DOCX to Text easily.
Batch convert DOC to TXT with GUI that supports powerful search function.
Supports convert a doc/docx file.
Supports convert doc/docx files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch PPT TO PDF Converter is a PowerPoint PPT/PPTX to PDF Batch Converter can convert PowerPoint PPT(X) to PDF (Portable Document Format) easily. Batch PPT TO PDF Converter supports powerful search for lots of files. A PDF publisher for PowerPoint. Batch PPT TO PDF Converter supports project and command line. Batch PPT TO PDF Converter has a friendly GUI so it is used very easily. Batch PPT TO PDF Converter Drag and Explorer Context supported.

Batch PPT TO PDF Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-ppt2pdf) for re-use. You can run the batch-ppt2pdf project in Microsoft Windows Explorer or command line directly.

The main features of Batch PPT to PDF Converter
Convert PowerPoint PPT/PPTX to PDF (Portable Document Format) easily.
Batch convert PPT to PDF with GUI that supports powerful search function.
Supports convert a ppt/pptx file.
Supports convert ppt/pptx files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch XLS AND XLSX Converter is a Excel XLS to XLSX, XLSX to XLS Batch Converter that can convert Excel XLS to XLSX and XLSX to XLS easily. Batch XLS TO XLSX Converter supports powerful search for a lot of files. A XLS and XLSX converter for Excel. Batch XLS AND XLSX Converter supports project and command line. Batch XLS AND XLSX Converter has a friendly GUI so it is used very easily. Batch XLS & XLSX Converter Drag and Explorer Context supported.

Batch XLS AND XLSX Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-xls2xls) for re-use. You can run the batch-xls2xls project in Microsoft Windows Explorer or command line directly.

The main features of Batch XLS and XLSX Converter
Convert Excel XLS (Excel 2003) to XLSX (Excel 2007 OOXML Format) and XLSX to XLS easily.
Batch convert XLSX to XLS and XLS to XLSX with GUI that supports powerful search function.
Supports convert a xls/xlsx file.
Supports convert xls/xlsx files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Batch XLS TO PDF Converter is a Excel to PDF, XLS/XLSX to PDF Batch Converter that can convert Excel XLS/XLSX to PDF (Portable Document Format) easily. Batch XLS TO PDF Converter supports powerful search for a lot of files. A PDF publisher for Excel.

Batch XLS TO PDF Converter supports project and command line. Batch XLS TO PDF Converter has a friendly GUI so it is used very easily. Batch XLS TO PDF Converter Drag and Explorer Context supported.
Batch XLS TO PDF Converter supports an efficient Multi-Thread conversion engine. So you could control the conversion action very easily. You can stop or pause and continue it in any time.
You can save your conversion work in a project file (.batch-xls2pdf) for re-use. You can run the batch-xls2pdf project in Microsoft Windows Explorer or command line directly.

The main features of Batch Excel to PDF Converter
Convert Excel XLS/XLSX to PDF (Portable Document Format) easily.
Batch convert XLS to PDF with GUI that supports powerful search function.
Supports convert a xls/xlsx file.
Supports convert xls/xlsx files in a folder.
Drag and context menu with Microsoft Explorer supported.
Supports batch project and command line.
An efficient high-speed Multi-Thread conversion engine.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST, VST3, Audio Unit or built-in plug-ins into any Digital Audio Workstation (DAW) in one instance.
It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format (full list below). Use the built-in audio effects to add color to your own plug-in chains.
Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack's matrix. All plug-ins can also communicate with each other or with the host application using the virtual MIDI ports offered by the plug-in.
For each plug-in slot, latency compensation, presets management, undo/redo integration, audio i/o selection and individual plug-in bypass are included for optimal operation. The plug-in also stores the position of the window for each plug-in so that the layout is restored with your session or saved with presets.
Also, sub plug-ins can be automated or controlled with external control surfaces using Blue Cat's PatchWork parameters mapping capabilities.
This product is available as an audio plug-in (effect or a virtual instrument) and standalone application, so that it can used alone or inserted on any type of track in your favorite DAW, with up to 16 audio channels.
Input and output level meters are also available to monitor the signal that is dispatched to inserted plug-ins, including side chain and aux channels.
Main Features
Configurable VST, VST3 or Audio Unit plug-ins rack: host up to 64 third party plug-ins or instruments in series or parallel.
30 built-in effects: Reverb, EQ, filters, pitch & frequency shifter, delays, modulation effects, compressor, gate, bit crusher, wave shaper and more.
Available as an effect, virtual instrument or standalone application.
Build your own effects chains: up to 8 "pre" and "post" plug-ins slots to chain plug-ins in series.
Parallel processing made easy: up to 8 parallel plug-ins chains, with phase flip, solo and gain controls.
Host up to 8 virtual instruments in parallel and mix them within the plug-in.
Global Dry/Wet control ("Mix").
Parameters Mapping: map sub plug-ins parameters to automate them or use a control surface.
Flexible MIDI routing: connect sub plug-ins together or with the host application.
Flexible Audio routing: connect sub plug-ins i/o to any audio channel.
External side chain and multiple outputs support.
Link pre and post gains for automatic gain compensation.
Drag and drop or cut, copy and paste plug-ins with their settings between slots.
Recall complex processing setups and plug-ins layouts with one click and share them between your DAWs.
Input and output levels monitoring.
Plug-ins Latency compensation.
Supports VST Shell plug-ins.
Integrated undo/redo.
Fully customizable user interface, with multiple sizes.