EnviroSim BioWin 6.0 | 203.0 mb
The EnviroSim team is pleased to announce the release of BioWin 6.0. New features in this release can be divided into two main areas : Model Additions and Usability Upgrades.
[b
BioWin 6.0 highlights include:[/b]
Model Additions
- Chemical Phosphorus Removal
- Sulfur (Biological, RedOx, etc.)
- Industrial Organics
- CEPT
- Iron RedOx
- P Recovery (Brushite, Vivianite)
- Cellulose
- Source Separated Organics
Usability Upgrades
- Drawing Tools / Undo
- Excel Reporting
- Variable Naming / Sorting
- Element Tags
- Integrated Influent Specifier
- Table Transposition
- Optional Alarms
- More Example Flowsheet Templates
- Set All Parameters Default
- Metal Salt Sol'n Densities
- m3/hr Flow Units Option
- Wet Tonne Sludge Cost Option
BioWin is a wastewater treatment process simulator that ties together biological, chemical, and physical process models. BioWin is used world-wide to design, upgrade, and optimize wastewater treatment plants of all types. The core of BioWin is the proprietary biological model which is supplemented with other process models (e.g. water chemistry models for calculation of pH, mass transfer models for oxygen modelling and other gas-liquid interactions). The BioWin model is owned, developed, and supported exclusively by EnviroSim and is the original "whole plant" model.
This video provides a brief introduction to the BioWin wastewater treatment process simulator.
EnviroSim provides simulation software solutions and consulting services for wastewater process engineers around the world. Our expertise includes municipal and industrial wastewater treatment, Biological Nutrient Removal (BNR) process design and optimization, wastewater characterization / kinetic studies, and model calibration.
Our attention to detail, support for the latest international models, and continual development and enhancement of BioWin and PetWin+ make them invaluable tools for plant operation and design. EnviroSim is continually engaged in ongoing research and development to ensure that both BioWin and PetWin+ remain as the leading wastewater process simulators. Our development is driven by the needs of our customers, which serves to enhance the real-world applicability of our products.
Product: EnviroSim BioWin
Version: 6.0
Supported Architectures: 32bit / 64bit
Website Home Page :
У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 203.0 mb
Operating system:
BioWin will run on any variety of Windows from Windows 98 and up. It also will run on Windows NT, Windows 2000 and Windows Vista
Recommend: Windows 7
Processor and Memory:
Processor equivalent to a Pentium IV @ 800 MHz with 128 MB RAM should be sufficient for running BioWin. Simulation speed is directly related to clock speed and system memory (memory is especially important for longer term dynamic simulations).
Recommend: 1GB memory is usually sufficient for most configurations (for very large, or very long term simulations more memory may be required). In the absence of memory limitations processor speed has the biggest impact on simulation speed - a general rule the faster the processor, the better.
BioWin does not take advantage of more than one core. However, a modern dual-core processor will still out perform an older single-core processor. If you are considering an upgrade, the dual-core processors from Intel and AMD are the best choice."
Disk Space:
On most new machines disk space is unlikely to be a limitation - a full BioWin install takes less than 100 MB. It should be remembered however that long term simulations can generate lots of data, so BioWin files of these simulations can be quite large.
Screen Size:
BioWin displays some large dialog boxes, and consequently a minimum display resolution of 1024X786 is required.
Recommend: BioWin has extensive graphical output so higher resolution graphics cards and monitors are recommended. If graphical output is shown during the simulations then the simulation speed may also be affected by the graphics card speed and memory.
Reporting software:
BioWin can generate a report in Microsoft Word, however this feature requires Microsoft Word 2000 or higher.
DOWNLOAD
Код:
http://nitroflare.com/view/FE1163F9C218D74/4rt0p.EnviroSim.BioWin.6.0.rar
Код:
https://rapidgator.net/file/514a342e30a6180460daadff6b6fdbe9/4rt0p.EnviroSim.BioWin.6.0.rar