Altair FluxMotor 2019.0.0 (x64)

akare

New Member

Altair FluxMotor 2019.0.0 | 1.2 Gb

Altair announces the release of FluxMotor 2019.0.0, a dedicated platform focusing on the pre-design of electric rotating machines. This release includes a variety of bug fixes and technical improvements as well as new features and tools.

The major point of this new version is the implementation of three new types of machinesinto FluxMotor:
- Synchronous Machines with Permanent magnets - Outer Rotor
- Induction Machines with Squirrel Cage - Inner Rotor
- Induction Machines with Squirrel Cage - Outer Rotor

Below is the list of new major features implemented in Altair FluxMotor 2019:

Synchronous Machines - Permanent Magnets - Outer Rotor

Motor Factory - Design environment:
- New areas to define inner slots, outer magnetsand new types of shafts
Motor Factory - Test environment:
- 12 tests are available (Beta mode)
Motor Factory - Export environment:
- Models can be exported in Flux2D environment
- For Static and Transient application
- Solving scenario ready to be run and post-processed.
- Back-emf and working point defined by current, control angle and speed
Part Library-Part Factory
- 37 outer magnet topologiesavailable
- 54 inner slot topologiesavailable
Motor Catalog
- Threenew referencecatalogs of Synchronous Machines with Permanent magnets and Outer Rotorare available

Induction Machines with Squirrel Cage - Inner and Outer rotor

Motor Factory - Design environment
- New areas to define rotor bars, end ring and new types of shaft
Motor Factory - Export environment:
a) Models can be exported in Flux 2D environment
- For Steady state AC Magnetic applicationand Transient application
- Solving scenario ready to be run and postprocessed.
- Working point defined by line-line voltage, supply frequency and speed
b)Models can be exported in Flux Skew environment
- For Steady state AC Magnetic applicationand Transient application
- Solving scenario ready to be run and postprocessed.
- Working point defined by line-line voltage, supply frequency and speed
Part Library - Part Factory
- 45 inner bar topologies
- 45 outer bar topologies are available.
Motor Catalog
- Two new referencecatalogs of Induction Machines with Squirrel Cage -Inner and Outer rotor are available

Test and computation improvement

Coupling FluxMotor HyperStudy
New Couplingsbetween Altair FluxMotor and AltairHyperStudy for the test dealing with Generator modesine wave drive:
- Computation of a working point targeted with current, control angle and speed (I,, N)
- Computation of a working point defined by a 3-phase star-connected load (R, L) and speed N
- Performance mapping of the generator behavior in the "torque-speed" area with the MTPA command mode
Flux density isovalues and potential vector isolines are displayed in tests like:
- Characterization / Open circuit / Motor & generator / Back emf
- Working point / Sine wave / Motor / I, , N
- Working point / Sine wave / Generator/ I, , N1.5Improvement of the GUI in Motor Factory
- New Motor Factory Design Home page.
- Less number of clicks needed to start a design
- Building of winding architecture in expert mode has been simplified
- Building of the report is now more robust and faster1.
New licensing system and user modes available
- Installation of FluxMotor withInstall Anywhere
- New user level mode: Beta mode to evaluate new features in advance

About Altair FluxMotor. FluxMotor is part of Altair's HyperWorks CAE Suite, which includes Flux the leading software for low frequency electromagnetic and thermal simulations. The software tool allows users to design and create machines from standard or customized parts, as well as to intuitively add windings and materials to run a selection of tests and compare machine capacity. Based on modern technology, the standalone platform offers fast and accurate computations. When necessary, connection with Altair Flux finite element software enables more advanced studies, taking into account more complex phenomenon.

Efficient machine pre-design and quick performance evaluation

About Altair. Altair is a leading provider of enterprise-class engineering software enabling innovation, reduced development times, and lower costs through the entire product lifecycle from concept design to in-service operation. Our simulation-driven approach to innovation is powered by our integrated suite of software which optimizes design performance across multiple disciplines encompassing structures, motion, fluids, thermal management, electromagnetics, system modeling and embedded systems, while also providing data analytics and true-to-life visualization and rendering.

Product: Altair FluxMotor
Version: 2019.0.0
Supported Architectures: x64
Website Home Page :
Код:
http://www.altairhyperworks.com
Language: english
System Requirements: PC *
Supported Operating Systems: Windows 7even (64bit) or Windows 10 (64bit)
Size: 1.2 Gb

Memory (RAM): 1 GB if RAM required.
Hard Disk Space: 2 GB of free space required.
Processor: Intel Dual Core processor or later
DOWNLOAD

Код:
http://nitroflare.com/view/EC16EC89A0DF84B/pgh05.Altair.FluxMotor.2019.0.0.x64.part1.rar
http://nitroflare.com/view/7083D3BFCD6BBBD/pgh05.Altair.FluxMotor.2019.0.0.x64.part2.rar
Код:
https://rapidgator.net/file/0455048d046762c2243118574c543358/pgh05.Altair.FluxMotor.2019.0.0.x64.part1.rar
https://rapidgator.net/file/7852170c3c65afd96cf82b483bff6fe7/pgh05.Altair.FluxMotor.2019.0.0.x64.part2.rar
Код:
http://uploaded.net/file/7for4o99/pgh05.Altair.FluxMotor.2019.0.0.x64.part1.rar
http://uploaded.net/file/8s27qbic/pgh05.Altair.FluxMotor.2019.0.0.x64.part2.rar
 
Сверху Снизу