All mitsumi'1s Applications !! (updated daily)

mitsumi

New Member

d662693c2c1599c60d689fcd46787f98.jpeg

Ph : Introduction , Basic Concepts And Applications
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 353.24 MB | Duration: 1h 9m

pH : Introduction , Basic concepts and Applications​

What you'll learn
Introduction to pH
Definition of pH
Basic concepts and pH Scale
Applications of pH
Requirements
No prior knowledge needed .
Description
pH, quantitative measure of the acidity or basicity of aqueous or other liquid solutions. The term, widely used in chemistry, biology, and agronomy, translates the values of the concentration of the hydrogen ion-which ordinarily ranges between about 1 and 10−14 gram-equivalents per litre-into numbers between 0 and 14. In pure water, which is neutral (neither acidic nor alkaline), the concentration of the hydrogen ion is 10−7 gram-equivalents per litre, which corresponds to a pH of 7. A solution with a pH less than 7 is considered acidic; a solution with a pH greater than 7 is considered basic, or alkaline.The measurement was originally used by the Danish biochemist S.P.L. Sørensen to represent the hydrogen ion concentration, expressed in equivalents per litre, of an aqueous solution: pH = −log[H+] (in expressions of this kind, enclosure of a chemical symbol within square brackets denotes that the concentration of the symbolized species is the quantity being considered).Because of uncertainty about the physical significance of the hydrogen ion concentration, the definition of the pH is an operational one; i.e., it is based on a method of measurement. The U.S. National Institute of Standards and Technology has defined pH values in terms of the electromotive force existing between certain standard electrodes in specified solutions.pH meterpH meterThe pH is usually measured with a pH meter, which translates into pH readings the difference in electromotive force (electrical potential or voltage) between suitable electrodes placed in the solution to be tested. Fundamentally, a pH meter consists of a voltmeter attached to a pH-responsive electrode and a reference (unvarying) electrode. The pH-responsive electrode is usually glass, and the reference is usually a mercury-mercurous chloride (calomel) electrode, although a silver-silver chloride electrode is sometimes used. When the two electrodes are immersed in a solution, they act as a battery. The glass electrode develops an electric potential (charge) that is directly related to the hydrogen-ion activity in the solution, and the voltmeter measures the potential difference between the glass and reference electrodes. The meter may have either a digital or an analog (scale and deflected needle) readout. Digital readouts have the advantage of exactness, while analog readouts give better indications of rates of change. Battery-powered portable pH meters are widely used for field tests of the pH of soils. Tests of pH may also be performed, less accurately, with litmus paper or by mixing indicator dyes in liquid suspensions and matching the resulting colours against a colour chart calibrated in pH.In agriculture, the pH is probably the most important single property of the moisture associated with a soil, since that indication reveals what crops will grow readily in the soil and what adjustments must be made to adapt it for growing any other crops. Acidic soils are often considered infertile, and so they are for most conventional agricultural crops, although conifers and many members of the family Ericaceae, such as blueberries, will not thrive in alkaline soil. Acidic soil can be "sweetened," or neutralized, by treating it with lime. As soil acidity increases so does the solubility of aluminum and manganese in the soil, and many plants (including agricultural crops) will tolerate only slight quantities of those metals. Acid content of soil is heightened by the decomposition of organic material by microbial action, by fertilizer salts that hydrolyze or nitrify, by oxidation of sulfur compounds when salt marshes are drained for use as farmland, and by other causes.
Overview
Section 1: Introduction
Lecture 1 Introduction
Section 2: pH Basic concepts
Lecture 2 pH Basic concepts : pH scale
Section 3: pH Basic concepts
Lecture 3 pH : Basic concepts : pH Indicators
Section 4: pH : basic concept
Lecture 4 pH : POH and Kw
Section 5: pH of water and Summary
Lecture 5 pH of Water and Summary
Section 6: Effect of Temperature on pH
Lecture 6 Effect of Temperature on pH
Section 7: Examples of pH Applications
Lecture 7 Examples of pH Applications
Course intended for Allied health professionals and health professionals

a9ce97b65c6ec0ca4e811829a8e2a764.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/039940774a9a8dd2cc824a9bbba444cb/wmiwb.Ph..Introduction..Basic.Concepts.And.Applications.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/De4210Fed55dcF46/wmiwb.Ph..Introduction..Basic.Concepts.And.Applications.rar

nitroflare.com:
Код:
https://nitroflare.com/view/46CB26B92E6E72A/wmiwb.Ph..Introduction..Basic.Concepts.And.Applications.rar

1dl.net:
Код:
https://1dl.net/4s8mkgznwddu/wmiwb.Ph..Introduction..Basic.Concepts.And.Applications.rar
 

mitsumi

New Member

11ba9450824498b706f6fba887e89de2.jpeg

Radiographic (X-Ray) Positioning Made Easy: Upper Extremity.
Last updated 5/2020
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 1.46 GB | Duration: 1h 34m

Learn How to Position a Patient for X-ray of different parts of UPPER EXTREMITY: Hand, Wrist, Elbow, Shoulder ...​

What you'll learn
Medical Imaging: How To Position Patients for X-rays.
Radiology: Learn Hands On UPPER LIMB Positioning: Hand, Thumb, Fingers, Wrist, Forearm, Elbow, Humerus, Shoulder and Clavicle.
To become confident with positioning of patients for X-ray examinations.
Complete training and be confident with Upper Limb X-rays, Anatomy and Radiographs.
Requirements
No Previous Experience Needed.
Description
When I was a student radiographer at Canterbury Christ Church University here in England, I struggled with radiographic positioning. Most times in clinical placements radiographers were very busy with heavy work loads and had little time to spend explaining how to position a patient for an X-ray. Most times they were very quick and before I could figure out what they were doing the X-ray had already been done.Hence, I'm teaching this course from the student perspective, by-passing all the jargons to make sure I teach you exactly what you need to know to thrive as an excellent and confident radiographer. Radiographic Positioning Made Easy is not filled with high technical, text-book terminologies, but simple and direct skills of what I have learnt from my British National Health Service (NHS) experience as a qualified practicing radiographer, with over 35,000 patients seen in the last six years.I am sure that there are many student radiographers out there who are going through exactly what I went through some years back as an undergraduate student. If you are that kind of person then you are in the right place. At the end of this course you will be very confident and bold about your positioning.I applied a systematic approach to this course and logically divided the course into different body areas:Each section has different lectures covering specific body parts. Upper Extremity is made up of the following lectures viz:Lecture 1- IntroductionLecture 2 - Welcome messageLecture 3 - How to position patients for a Hand X-rayLecture 4 - How to position patients for a Thumb X-rayLecture 5 - How to position patients for a Finger X-rayLecture 6 - How to position patients for a Wrist X-rayLecture 7 - How to position patients for a Scaphoid X-rayLecture 8 - How to position patients for Forearm X-rayLecture 9 - How to position patients for a Elbow X-rayLecture 10 - How to position patients for a Humerus X-ray.Lecture 11 - How to position patients for a Shoulder X-ray Lecture 12 - How to position patients for a Clavicle X-rayLecture 13 - Conclusion.In this way it's easy for you to go directly and get the specific information you need at any given time without wasting your precious time looking through endless search engine results.Furthermore, it's important to note that Radiography is the backbone of modern healthcare and positioning of the patient is the heart of any radiographic examination. It is the core of what we do as radiographers. If you get positioning wrong, you might end up with a sub-optimal image or even a non-diagnostic image which is not really what you want. Radiographic positioning is vital important whether you are using Computed Radiography (CR) or Digital Radiography (DR) systems.At the end of each lecture there is a short assignment to make sure you are abreast with the key skills. I am sure that at the end of this course you will be bold and confident to carry out different radiographic examination.Finally, I am always happy to assist you in any area that you need more help. Please feel free to leave a comment here or connect with me on social media through my Udemy personal profile.Happy Learning!!!
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 Welcome Lecture
Section 2: HAND, THUMB & FINGERS X-ray Positioning
Lecture 3 X-ray positioning: HAND
Lecture 4 X-ray positioning: THUMB
Lecture 5 X-ray positioning: FINGER
Section 3: Section 3: WRIST, SCAPHOID, FOREARM & Elbow X-ray Positioning
Lecture 6 X-ray positioning: WRIST
Lecture 7 X-ray positioning: SCAPHOID
Lecture 8 X-ray positioning: FOREARM (RADIUS & ULNA)
Lecture 9 X-ray positioning: ELBOW
Section 4: Section 4: Humerus, Shoulder & Clavicle X-ray positioning
Lecture 10 X-ray positioning: HUMERUS
Lecture 11 X-ray positioning; SHOULDER
Lecture 12 X-ray positioning: CLAVICLE
Section 5: Section 5: Conclusion
Lecture 13 CONCLUSION
Student Radiographers, Newly Qualified Radiographers, Radiologic Technologist Students, A-level students, High School students.

11ab6a4871e5d7f804e12babc8a62d1f.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/c884011896a808416f7fc707c4b9621e/tgsex.Radiographic.XRay.Positioning.Made.Easy.Upper.Extremity..rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/03d6b69700f274e7/tgsex.Radiographic.XRay.Positioning.Made.Easy.Upper.Extremity..rar

nitroflare.com:
Код:
https://nitroflare.com/view/20D8D2E3992FBED/tgsex.Radiographic.XRay.Positioning.Made.Easy.Upper.Extremity..rar

1dl.net:
Код:
https://1dl.net/7axitb0ilh1u/tgsex.Radiographic.XRay.Positioning.Made.Easy.Upper.Extremity..rar
 

mitsumi

New Member

6c2a758a6a63232351923665b9b23481.jpeg

Rcc Pedestrian Bridge Design And Details Structural Drawing
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 2.00 GB | Duration: 2h 51m

RCC Pedestrians Bridge Modeling, Loading, Analysis, Design and Details Drawings Using Protastructure Suite and AutoCAD​

What you'll learn
Studying the pedestrian bridge plan/understanding the bridge length and width in AutoCAD
Preparing pedestrian bridge working plan and converting it from DWG to DXF AutoCAD format
Starting Protastructure Suite (Structural Analysis Design Software) and brief introduction to design code of practice
Importing 2D DXF file of the pedestrian bridge plan to Protastructure Suite
Grid Lines editing/numbering in Protastructure
Modeling of RCC columns and trestle of the pedestrian bridge
How to use plane definition to incline or slope trestle in Protastructure Suite
Modeling the pedestrians bridge hand rail guide
Applying Loading combinations and additional human loads on the pedestrians bridge
Setting the soil bearing capacity and structural members material
Checking the bridge for modeling errors and corrective measure
Running Analysis and Design of the whole bridge structural elements
Generating the bridge trestle/ slab reinforcement
Optimizing the design structural elements eg. columns and trestle
Foundation design of the bridge
Generating the Design Details Drawings and exporting it to AutoCAD
Preparing the Details Drawings in AutoCAD for final printing/publishing
Requirements
You need a computer, AutoCAD and Protastructure Suite Software
You need a little knowledge about AutoCAD Software
Description
This course will teach you Two ways Pedestrians Bridge Modeling, Loading, Analysis, Design and Detail Structural Drawings using Protastructure Suite and AutoCAD. We will learn how to export drawings from AutoCAD software to Protastructure Suite(Structural Analysis and Design Software) for Structural modeling.We will export the design result to prota details and further more to AutoCAD and this will be explaining properly for ease of understanding.We will produce a working drawings by detailing and editing all the structural elements such as bridge trestle (slab), column and foundation layout / footings.We will consider drawing to scale 1:100, 1:50. 1:25 etc.We will learn how to create title block to scales, arrange all drawings there in and plot.These course is for both beginners and pro in the following area of· Civil Engineering· Structural Engineering· Building Designers· Architects· People who want to become structural draftsman· People who wants to become structural designers· Building technologistA pedestrian bridge, also called a footbridge, is simply a bridge, whether over land or water, that is designed for foot traffic as opposed to vehicle traffic. Often, footbridges are constructed to give pedestrians a safe way to cross from one side of a busy road to the other. There are also pedestrian bridges built over railroad tracks, rivers, parking lots, canyons and other areas where walking could be perilous or even impossible.All the training material are uploaded for smooth flows of learning. The code of practice to be use is the British code for the use of structure and the loading of structure as well which is BS 8110 and BS6399/ EURO CODE
Overview
Section 1: Introduction
Lecture 1 Introduction to Pedestrian Bridge Design Course
Lecture 2 Exporting DXF, Setting Foundation Level and Editing Storey
Lecture 3 Assigning Different Levels to the Concrete Column
Lecture 4 Plane Definition(Applying Slope to Trestle) Settings and Railings
Lecture 5 Adding Slab Additional Load, Soil Capacity, Project Name and Material Setting
Lecture 6 Adding FE Strip, FE Settings, Static and FE Analysis and Foundation Design
Lecture 7 Generating Rebars for the Trestle, Colorings the Project and Exporting
Lecture 8 Export Files to AutoCAD, Foundation Layout and Pad Base Editing
Lecture 9 Trestle (Raft Slab) Detailing and Editing for the Bridge Platform
Lecture 10 Reinforce Concrete Column Detailing and Editing in AutoCAD
Lecture 11 Adding Drawings to Sheet and Plotting
People who have no experience of Protastructure analysis and design software but want to learn it,Beginners in civil structural analysis, design and details drawings,Beginners in Protastructure Suite (Structural Analysis and Design Software),People who want to learn Building analysis, design and details structural drawings,People who want to advance in the use of Protastructure building analysis and design software,The Civil Engineers,The Structural Engineers,The Building Technologist,The Building Architects

3c8fdb9a196eabec05e58d5265cdec54.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/54a575af7b97d288a5a978e5afb4d25f/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part1.rar.html
https://rapidgator.net/file/968dc3af69613c397cc9cabf9895d20f/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part2.rar.html
https://rapidgator.net/file/588198822a1535b822b9f6e10e2594ea/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/ffc352dC768f56ac/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part1.rar
https://uploadgig.com/file/download/9a69EedF1b27d2d3/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part2.rar
https://uploadgig.com/file/download/a011D29E269a41c7/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/A1DD5C96AF42C43/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part1.rar
https://nitroflare.com/view/5F84F436B0A9732/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part2.rar
https://nitroflare.com/view/A78F96F5D4ACDB2/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part3.rar

1dl.net:
Код:
https://1dl.net/7v39tyfzog66/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part1.rar
https://1dl.net/zep0ebvetkux/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part2.rar
https://1dl.net/mptqgy50jm6f/quryk.Rcc.Pedestrian.Bridge.Design.And.Details.Structural.Drawing.part3.rar
 

mitsumi

New Member

f38c9d1346b9a5e33ba29dba67d82c25.jpeg

Reels Marketing Training
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 508.03 MB | Duration: 1h 19m

Instagram Reels Marketing HD Video Course will enable you to level up, optimize your marketing efforts.​

What you'll learn
Introduction video, you will get a detailed explanation of what will be included in the complete training.
You will learn what Instagram Reels is all about.
You will find information about how to sign up for Instagram Reels.
You will have a complete walkthrough about Instagram Reels.
You will learn all about branding your Instagram Reels profile for business.
You will learn everything about creating your first Instagram Reels video.
You will find out how to increasing reach by cross-promoting your Instagram Reels Content on other social platforms.
You will know how businesses use Instagram Reels in the real world.
You will learn everything about Instagram Reels Hashtags.
You will find out ways how brands are using Instagram Reels.
You will find out the best Instagram Reels video ideas to boost your brand.
You will find out why and how to use Instagram Reels to market your Shopify store.
You will find out how to run a contest or sweepstakes on Instagram the right way.
You will learn everything about best Instagram Reels Marketing strategies to increase followers.
You will find out the Pros & Cons of Instagram Reels Marketing.
Requirements
No programming experience needed. You will learn everything you need to know about Instagram Reels.
Description
E uma excelente oportunidade para aprender como começar com o Instagram Reels Marketing para interagir com um público mais amplo, alimentar seus esforços de branding e ajudar as marcas a lucrar com mais ROI.O Instagram Reels é o formato mais recente do Instagram Stories que pode ser usado para criar e compartilhar videoclipes de 15 segundos com seus seguidores ou, se você tiver uma conta pública, com a comunidade maior do Instagram por meio da página Explorar.E como o conteúdo de vídeo está na moda agora, as principais marcas estão usando o Instagram Reels para marketing comercial, compartilhando conteúdo de vídeo curto para transmitir suas mensagens de marca e publicidade na página Explorar, bem como com os seguidores, para ganhar força.As it rolled out to the majority of users in August 2020, this feature is being made available across 50 countries, including the U.S., making it an impeccable platform to interact with audiences and fuel your branding endeavors.The timing is also fortuitous, given TikTok's uncertain future in the U.S. as the Trump administration weighs either banning the Chinese-owned app entirely or forcing it to sell off its U.S. operations.This guide will discuss why Instagram Reels Marketing is important for your business, as well as the process of creating attention-grabbing sales-oriented videos on them and all the answers about utilizing this platform.Em suma, está repleto de informações sobre como mostrar suas marcas usando o Instagram Reels de maneira eficaz e inspirar ações voltadas para vendas em sua página do Instagram.
Overview
Section 1: Introduction
Lecture 1 Introduction video
Section 2: Video 2
Lecture 2 You will learn what Instagram Reels is all about.
Section 3: Video 3
Lecture 3 Sign up for Instagram Reels.
Section 4: Video 4
Lecture 4 Complete walkthrough about Instagram Reels.
Section 5: Video 5
Lecture 5 All about branding your Instagram Reels profile for business.
Section 6: Video 6
Lecture 6 Creating your first Instagram Reels video.
Section 7: Video 7
Lecture 7 How to increasing reach by cross-promoting your Instagram Reel
Section 8: Video 8
Lecture 8 How businesses use Instagram Reels in the real world.
Section 9: Video 9
Lecture 9 Everything about Instagram Reels Hashtags.
Section 10: Video 10
Lecture 10 Find out ways how brands are using Instagram Reels.
Section 11: Video 11
Lecture 11 Best Instagram Reels video ideas to boost your brand.
Section 12: Video 12
Lecture 12 Why and how to use Instagram Reels to market your Shopify stor
Section 13: Video 13
Lecture 13 How to run a contest or sweepstakes on Instagram the right way
Section 14: Video 14
Lecture 14 Everything about best Instagram Reels Marketing strategies to increas followers
Section 15: Video 15
Lecture 15 Pros & Cons of Instagram Reels Marketing.
The course is intended for digital marketing professionals, entrepreneurs, influencers, and social media enthusiasts who want to enhance their marketing skills on Instagram Reels. It provides practical knowledge for creating engaging content, promoting brands and products, and increasing audience engagement and reach. It is a unique opportunity to boost success in the digital landscape.

2161713890e099d10d946fa2bd7610d6.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/01c8dd230393446f2c8e3e90c21721b0/xziuk.Reels.Marketing.Training.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/CA791512116fb0E3/xziuk.Reels.Marketing.Training.rar

nitroflare.com:
Код:
https://nitroflare.com/view/C7BBB4C54DBC76D/xziuk.Reels.Marketing.Training.rar

1dl.net:
Код:
https://1dl.net/36pv6fdg9e9g/xziuk.Reels.Marketing.Training.rar
 

mitsumi

New Member

18bc6193d07aef3240ec2c2f2915897c.jpeg

Revit Detailing Masterclass
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 4h 06m | 2.25 GB
Genre: eLearning | Language: English​

Detailing View Types
You will learn how to use different view types in order to create details that have different requirements. By using the correct view type for the task you will be much more efficient in your detailing

Detailing Tools
Revit offers many different tools that can be used for detailing and you will learn how to apply them in different ways for a wide range of results.
Detailing Workflow
The most important topic is going to be workflow. Apart from learning how to use the tools individually you will also put them to the test on some real examples of details.

1f3d72604eb24c7c8ea5c14b50a114f3.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/a5f8d9c8fa9099e2834f7483e3679aa8/iakbd.Revit.Detailing.Masterclass.part1.rar.html
https://rapidgator.net/file/be69d31175a4754f6d968621180bb882/iakbd.Revit.Detailing.Masterclass.part2.rar.html
https://rapidgator.net/file/7eca0ce31c144cb72b180047433a5623/iakbd.Revit.Detailing.Masterclass.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/10F80c166F6874ce/iakbd.Revit.Detailing.Masterclass.part1.rar
https://uploadgig.com/file/download/ccD769674515c480/iakbd.Revit.Detailing.Masterclass.part2.rar
https://uploadgig.com/file/download/a2be1c8D425d5ec6/iakbd.Revit.Detailing.Masterclass.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/6C9E7C8175F0AAA/iakbd.Revit.Detailing.Masterclass.part1.rar
https://nitroflare.com/view/3274FE9772D7EA7/iakbd.Revit.Detailing.Masterclass.part2.rar
https://nitroflare.com/view/1E64C8E599E4448/iakbd.Revit.Detailing.Masterclass.part3.rar

1dl.net:
Код:
https://1dl.net/iezutrz4lvmz/iakbd.Revit.Detailing.Masterclass.part1.rar
https://1dl.net/509btec9bs5o/iakbd.Revit.Detailing.Masterclass.part2.rar
https://1dl.net/vszd1y89nc1p/iakbd.Revit.Detailing.Masterclass.part3.rar
 

mitsumi

New Member

921d424a3f071220da1a057bd48d00a8.jpeg

Revit Family Editor Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 12h 24m | 3.22 GB
Genre: eLearning | Language: English

Develop a complete understanding of the Revit Family Editor​

The course starts from the beginning, so even someone that is just getting started can follow along and understand this complex modeling environment.
Explore all complex features, setting, tools and workflows

You will learn about all settings so you will have fill control over your custom built families or existing families that you are modifying according to your preferences.
Put all new knowledge to the test by completing 7 different projects

Best way to become a pro is project based learning. Here you will learn advanced workflow, troubleshooting and how complete families on a professional level.

rapidgator.net:
Код:
https://rapidgator.net/file/af5162d4551d0189870c88be0e58fab4/mtppr.Revit.Family.Editor.Course.part1.rar.html
https://rapidgator.net/file/332a38e42ccd44ea1cbfa44e67f9c444/mtppr.Revit.Family.Editor.Course.part2.rar.html
https://rapidgator.net/file/0564c3dbf5727459d8840601a70d118c/mtppr.Revit.Family.Editor.Course.part3.rar.html
https://rapidgator.net/file/1406b9b69391359572a3638c21524588/mtppr.Revit.Family.Editor.Course.part4.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/4d7974a29b612104/mtppr.Revit.Family.Editor.Course.part1.rar
https://uploadgig.com/file/download/5E7772711b81E3e7/mtppr.Revit.Family.Editor.Course.part2.rar
https://uploadgig.com/file/download/aDd452Dbb534f0aa/mtppr.Revit.Family.Editor.Course.part3.rar
https://uploadgig.com/file/download/24bc07eE0f4c37C6/mtppr.Revit.Family.Editor.Course.part4.rar

nitroflare.com:
Код:
https://nitroflare.com/view/20D226AF2E563A1/mtppr.Revit.Family.Editor.Course.part1.rar
https://nitroflare.com/view/BEADF94A1DA25E7/mtppr.Revit.Family.Editor.Course.part2.rar
https://nitroflare.com/view/B7710D97FBFE837/mtppr.Revit.Family.Editor.Course.part3.rar
https://nitroflare.com/view/D4D462A4F517C5E/mtppr.Revit.Family.Editor.Course.part4.rar

1dl.net:
Код:
https://1dl.net/jxinb4db40pb/mtppr.Revit.Family.Editor.Course.part1.rar
https://1dl.net/r9rygndcumk5/mtppr.Revit.Family.Editor.Course.part2.rar
https://1dl.net/514lmkbsk5y8/mtppr.Revit.Family.Editor.Course.part3.rar
https://1dl.net/l3iltot6e1d1/mtppr.Revit.Family.Editor.Course.part4.rar
 

mitsumi

New Member

b811c030fb8e31a491d8b35ec8d0f01f.jpeg

Revit Materials Masterclass
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 6h 23m | 2.13 GB
Genre: eLearning | Language: English​

We'll start with the basics!
If you are new to Revit materials and have no previous knowledge on how they are created, customized and applied, no worries, we will start from the absolute beginning!

Exploring the concepts
Some aspects of Revit materials can seem impossible to understand. Because of this we will cover how Revit looks are materials, material assets and what are the optimal was of implementing them.

0af3c98f2a7aa7f36c7e27aa50d74781.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/1165cf3db7ddb4d5f2f859227ab1ccaf/wwiaw.Revit.Materials.Masterclass.part1.rar.html
https://rapidgator.net/file/8c396e93b0b291743da1181c9338885e/wwiaw.Revit.Materials.Masterclass.part2.rar.html
https://rapidgator.net/file/d6a74345b3fdf03ec1fe4353a2efd631/wwiaw.Revit.Materials.Masterclass.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/17332A35B30d2c64/wwiaw.Revit.Materials.Masterclass.part1.rar
https://uploadgig.com/file/download/3f89FbadaD4a0a52/wwiaw.Revit.Materials.Masterclass.part2.rar
https://uploadgig.com/file/download/fd4ac4566fb6e1ef/wwiaw.Revit.Materials.Masterclass.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/381E03ED2C39F41/wwiaw.Revit.Materials.Masterclass.part1.rar
https://nitroflare.com/view/719AFF85DD81956/wwiaw.Revit.Materials.Masterclass.part2.rar
https://nitroflare.com/view/BADC89AA403CCF3/wwiaw.Revit.Materials.Masterclass.part3.rar

1dl.net:
Код:
https://1dl.net/kzxofmdc1v4m/wwiaw.Revit.Materials.Masterclass.part1.rar
https://1dl.net/pqdq20tyymh8/wwiaw.Revit.Materials.Masterclass.part2.rar
https://1dl.net/0w2qqqpyt84w/wwiaw.Revit.Materials.Masterclass.part3.rar
 

mitsumi

New Member

2f3a997763c3f647c47ca487d15edec5.jpeg

Revit MEP - Plumbing
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 4h 56m | 2.12 GB
Genre: eLearning | Language: English

Build you First Plumbing System​

Build you First Plumbing System

The course starts off with a project where we will be exploring how to build a complete plumbing system for a house in Revit
Explore the functionality of Each Plumbing Tool

Each tool is explored both trough project workflow as well as in-depth explanation of all functions and possible applications
Learn how to Create your own Plumbing Families

Your project can only be as good as the families that you use. This is why we will be exploring how to model our own Revit plumbing families

rapidgator.net:
Код:
https://rapidgator.net/file/b3a04c1330acb966feeb8340d4bb6710/hhfnb.Revit.MEP..Plumbing.part1.rar.html
https://rapidgator.net/file/21e9bd2e4267d0449b8b5c49d26a543c/hhfnb.Revit.MEP..Plumbing.part2.rar.html
https://rapidgator.net/file/f98050c214f4f6fb8eeeda550a807e91/hhfnb.Revit.MEP..Plumbing.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/f169e88713Cf3ce3/hhfnb.Revit.MEP..Plumbing.part1.rar
https://uploadgig.com/file/download/D1936bd182Dfee78/hhfnb.Revit.MEP..Plumbing.part2.rar
https://uploadgig.com/file/download/012905549509C078/hhfnb.Revit.MEP..Plumbing.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/C011CC92A1C414F/hhfnb.Revit.MEP..Plumbing.part1.rar
https://nitroflare.com/view/D993954574C82B0/hhfnb.Revit.MEP..Plumbing.part2.rar
https://nitroflare.com/view/F539CCBC8CDF73B/hhfnb.Revit.MEP..Plumbing.part3.rar

1dl.net:
Код:
https://1dl.net/l6mieumvyf2b/hhfnb.Revit.MEP..Plumbing.part1.rar
https://1dl.net/yln1n710r9kp/hhfnb.Revit.MEP..Plumbing.part2.rar
https://1dl.net/28z1z8hozsp0/hhfnb.Revit.MEP..Plumbing.part3.rar
 

mitsumi

New Member

068063dc22dce9b0b66bd7c390e11d5f.jpeg

Revit Roofs Masterclass
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 7h 17m | 2.51 GB
Genre: eLearning | Language: English​

Explore Roof Tools
The course starts off by covering all basic roof tools in Revit. Each tool is explained in depth.

All advanced settings are explained and compared so you can develop a complete understanding about how to pick out the best use for your project.
Learning Different Techniques

Roofs are a complex topic, it's not only necessary know about all tools, but also how to use them in different situations to achieve different results. All of this will be covered as well as how to use some of the tolls that aren't in the "roofs toolset" but are quite important.
Real-life Roof Projects

The best approach to learning is the project based approach, so this is why this course puts everything to the test by including a chapter where we model 9 Common Roof Shapes and a chapter where we take all of this to the next level and model additional 3 Complex Roof Designs

rapidgator.net:
Код:
https://rapidgator.net/file/aa292824460d08735ba8f20ca4ef446f/iwccx.Revit.Roofs.Masterclass.part1.rar.html
https://rapidgator.net/file/115d4711e15f7e766e7b3959bc9adc94/iwccx.Revit.Roofs.Masterclass.part2.rar.html
https://rapidgator.net/file/8c801a64c989d94882a4a96a8f00d285/iwccx.Revit.Roofs.Masterclass.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/9a918cA67F4f80D0/iwccx.Revit.Roofs.Masterclass.part1.rar
https://uploadgig.com/file/download/b686458A51d6e18E/iwccx.Revit.Roofs.Masterclass.part2.rar
https://uploadgig.com/file/download/f5D6d26c6F9e880B/iwccx.Revit.Roofs.Masterclass.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/F944BFEBE3F7531/iwccx.Revit.Roofs.Masterclass.part1.rar
https://nitroflare.com/view/EA8D46A8D1802E3/iwccx.Revit.Roofs.Masterclass.part2.rar
https://nitroflare.com/view/AA003E9626658E6/iwccx.Revit.Roofs.Masterclass.part3.rar

1dl.net:
Код:
https://1dl.net/unh0rwpolirx/iwccx.Revit.Roofs.Masterclass.part1.rar
https://1dl.net/9ucsyqmpik8n/iwccx.Revit.Roofs.Masterclass.part2.rar
https://1dl.net/5882t6jhnzbj/iwccx.Revit.Roofs.Masterclass.part3.rar
 

mitsumi

New Member

b3919da638f815cd12cdc0393fe3ea57.jpeg

Schedules in Revit Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 3h 12m | 1.32 GB
Genre: eLearning | Language: English​

Schedule creation
You will learn how to create all types of schedules and how to set the up so they display exactly what you want to show.

Schedules and graphics

Visual presentation within schedules is really important, so you will learn how to set up the graphics, insert image columns, how to highlight important values parametrically and much more.
Tips, tricks and best practices

You will learn about tips, tricks and best practices for working with schedules n revit so you will always be able to extract exactly what information you need from your project.

rapidgator.net:
Код:
https://rapidgator.net/file/a6cb9c37e657af14b88c0893a9b6d42d/ypobb.Schedules.in.Revit.Course.part1.rar.html
https://rapidgator.net/file/4290dfed3c8cb3fdc5cc5e3884a32c97/ypobb.Schedules.in.Revit.Course.part2.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/22cb0F0dc07e24e2/ypobb.Schedules.in.Revit.Course.part1.rar
https://uploadgig.com/file/download/bf6b70Ff7dD48e06/ypobb.Schedules.in.Revit.Course.part2.rar

nitroflare.com:
Код:
https://nitroflare.com/view/7ECDFF360058A1E/ypobb.Schedules.in.Revit.Course.part1.rar
https://nitroflare.com/view/95759ACEDD6BDAE/ypobb.Schedules.in.Revit.Course.part2.rar

1dl.net:
Код:
https://1dl.net/z25lnxxr0mkg/ypobb.Schedules.in.Revit.Course.part1.rar
https://1dl.net/s6ti3pw074yu/ypobb.Schedules.in.Revit.Course.part2.rar
 

mitsumi

New Member

03506f4e0cb8572cede57ed336da035a.jpeg

Servicenow Itsm Masterclass
Last updated 4/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 2.33 GB | Duration: 5h 28m

Learn the processes and capabilities of ServiceNow IT Service Management. Pass the ServiceNow ITSM CIS exam.​

What you'll learn
Understand ServiceNow ITSM processes
Learn how to administer the ServiceNow ITSM module
Prepare for the ServiceNow ITSM CIS exam.
Gain hands on experience in ServiceNow ITSM modules
Learn how modern AI like ChatGPT can enhance your ServiceNow processes
Requirements
ITIL foundation
ServiceNow CSA
Description
This course will get you up to speed with ServiceNow IT Service Management and will also help you pass the ServiceNow IT Service Management Certified Implementation Specialist exam to obtain this sought after certification.The course includes multiple quizzes, hands on labs, several hours of training videos and 2 practice tests.The course covers the requirements for the ServiceNow ITSM CIS exam which includes the following modules:Incident ManagementProblem ManagementChange & Release ManagementKnowledge ManagementService Catalog and Request ManagementConfiguration Management DatabaseAll of the above modules are covered in detail in terms of how it is used and configured. So this course are ideal for users of the platform as well as administrators.The course will guide you through creating your own ServiceNow instance which will be used for hands on labs throughout the course.This course does not replace the official ServiceNow training course, but is supplementary to the official curriculum.If you want to write the exam, you still need to do the official ServiceNow course and use this course to improve your chances of success.If you are not interested in writing the exam, this course will be very beneficial to get you up to speed in the workplace with ServiceNow ITSM without the need for conducting the official ServiceNow curriculum.
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 Overview of ServiceNow ITSM and the ServiceNow platform
Lecture 3 Spin up your own free Developer Instance
Lecture 4 ITSM role requirement Cheat sheet
Lecture 5 Navigating the ServiceNow interface
Section 2: Incident Management
Lecture 6 Introduction to Incident Management
Lecture 7 Understanding the Incident Management process steps.
Lecture 8 Logging an Incident
Lecture 9 Handling and Incident on the backend
Lecture 10 Actions on the Incident form
Lecture 11 Major Incident Management
Lecture 12 Configuring Incident Management
Lecture 13 Incident Management Reports and Dashboards
Lecture 14 Service Level Management
Section 3: Problem Management
Lecture 15 Introduction to Problem Management in ServiceNow
Lecture 16 Create and confirm a Problem
Lecture 17 Root cause analysis and Problem resolution
Lecture 18 Configuring ServiceNow Problem Management
Lecture 19 Problem Management KPI's and reports
Section 4: Change Management
Lecture 20 Introduction to Change Management
Lecture 21 Change Request State Progression
Lecture 22 Creating a Change Request
Lecture 23 Assess Change Request and submit for approval
Lecture 24 Working with the CAB process
Lecture 25 Working with Change Schedules
Lecture 26 Change Request Templates and Assignment Rules
Lecture 27 Managing Standard Changes
Lecture 28 Change Management KPI's and Reports
Section 5: Release Management
Lecture 29 Introduction to Release Management
Lecture 30 Starting with Release Management
Lecture 31 Working with Release Management
Section 6: Knowledge Management
Lecture 32 Introduction to ServiceNow Knowledge Management
Lecture 33 Searching the Knowledge Base
Lecture 34 Setup Knowledge Management Part 1
Lecture 35 Setup Knowledge Management Part 2
Lecture 36 Create and Approve a Knowledge Base Article
Lecture 37 Create Knowledge Articles using the MS Word plugin
Lecture 38 More Knowledge Management capabilities you need to be aware of.
Section 7: Service Catalog and Request Management
Lecture 39 Introduction to Service Catalog and Request Management
Lecture 40 Walkthrough of the Service Catalog
Lecture 41 Setup a Service Catalog
Lecture 42 Creating Service Catalog Items and Record Producers
Lecture 43 Configuring Execution Plans and Order Guides
Lecture 44 Managing Service Requests using Agent Workspace
Section 8: Configuration Management Database
Lecture 45 Introduction to ServiceNow's CMDB
Lecture 46 Populating the CMDB
Lecture 47 Understanding CI Relationships in the CMDB.
Lecture 48 Working with CMDB Baselines
Lecture 49 Understanding the CMDB Health Dashboard
Lecture 50 Working with the CMDB Data Manager
Section 9: ServiceNow ITSM Practice Tests
Section 10: Bonus Lectures: ChatGPT integration with ServiceNow ITSM use cases
Lecture 51 ChatGPT integration with ServiceNow Incident Management introduction
Lecture 52 Use Case 1: Integrate ServiceNow Virtual Agent with ChatGPT
Lecture 53 Use Case 2: Let ChatGPT choose Incident Categorization.
ServiceNow platform administrators and developers,Anyone who wants to advance their career by becoming a ServiceNow ITSM certified implementation specialist,Anyone who want to understand the ServiceNow ITSM processes in more detail

6ac35af784993853531c8362428bbd96.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/622265e439c604a0b60546889b0f71f7/dxkim.Servicenow.Itsm.Masterclass.part1.rar.html
https://rapidgator.net/file/6ab2947d71aea6abead761a08e6adfc0/dxkim.Servicenow.Itsm.Masterclass.part2.rar.html
https://rapidgator.net/file/686aa4f445d40aae9ec5c7f682b946e6/dxkim.Servicenow.Itsm.Masterclass.part3.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/04496221A5Ba4a26/dxkim.Servicenow.Itsm.Masterclass.part1.rar
https://uploadgig.com/file/download/6a0f5Fa867856246/dxkim.Servicenow.Itsm.Masterclass.part2.rar
https://uploadgig.com/file/download/4542B857b682B262/dxkim.Servicenow.Itsm.Masterclass.part3.rar

nitroflare.com:
Код:
https://nitroflare.com/view/D27B3414970AA51/dxkim.Servicenow.Itsm.Masterclass.part1.rar
https://nitroflare.com/view/727427C2F13D04A/dxkim.Servicenow.Itsm.Masterclass.part2.rar
https://nitroflare.com/view/FE29FDB25AB6623/dxkim.Servicenow.Itsm.Masterclass.part3.rar

1dl.net:
Код:
https://1dl.net/p5pk138woyqr/dxkim.Servicenow.Itsm.Masterclass.part1.rar
https://1dl.net/xa6vq0afg1r6/dxkim.Servicenow.Itsm.Masterclass.part2.rar
https://1dl.net/s374tyih7vrf/dxkim.Servicenow.Itsm.Masterclass.part3.rar
 

mitsumi

New Member

59a0e584c950d6399fe892ba60dd8470.jpeg

Simplified: 2023 Linkedin Lead Generation For B2B Sales
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 962.95 MB | Duration: 2h 25m

B2B sales through Linkedin in 2023: real-life examples, optimize profile, attract leads. Actionable Worksheets.​

What you'll learn
Build a top tier Linkedin profile for B2B Sales in 30 minutes
Build your Linkedin content strategy to attract inbound leads in 10 minutes
FREE and easy ways to find leads on Linkedin
Three simple Linkedin outreach techniques to connect with ANYONE you can apply right away
How to write effective Linkedin messages to get a meeting with ANYONE
Requirements
No Linkedin experience required
Description
Welcome to the "2023 LinkedIn Lead Generation for B2B Sales Made Easy" course, designed specifically for business owners, and sales professionals like you who want to boost their sales on LinkedIn. This practical program will empower you with actionable strategies and the latest practical techniques to activate your LinkedIn profile and attract potential clients. Get ready to grow your pipelines with the following key areas covered:profile Optimization: Create a compelling LinkedIn profile for B2B sales in 2023Personal Brand: Get your content plan ready in 10 minutesConnect with anyone: Write your first outreach campaign in 15 minutesNetwork Expansion: use effective methods to grow your network by connecting with influential professionals and decision-makers in your target market.Targeted Lead Search: apply the new search techniques, including Boolean search, groups, events, hashtags, Sales Navigator NEW filters and Buyer Intent.Write Persuasive Messages: write highly effective that captivate your prospects and open doors in 2023.Follow-Up techniques: Learn best practices for following up with leads who ignore you.Throughout the course, you will have access to practical worksheets, real-life examples, and additional resources you need to generate leads through Linkedin in 2023. Join us now and activate your LinkedIn for B2B sales!
Overview
Section 1: Introduction
Lecture 1 Welcome
Lecture 2 What you will learn in this course
Lecture 3 Linkedin Lead generation steps
Section 2: Building a strong Linkedin profile for B2B sales
Lecture 4 Principles of Building a strong Linkedin Profile for B2B Sales
Lecture 5 Best practices for creating a strong LinkedIn profile
Lecture 6 Optimising the profile for B2B sales
Lecture 7 Creating content
Section 3: How to find leads on Linkedin
Lecture 8 How to expand your LinkedIn network
Lecture 9 Linkedin Search techniques
Section 4: Three outreach techniques
Lecture 10 How people buy
Lecture 11 The Outreach strategy
Lecture 12 Warm-up
Lecture 13 The direct outreach
Lecture 14 Omnichannel outreach
Section 5: Effective messaging
Lecture 15 Effective messaging on Linkedin: best practices
Lecture 16 Invite note
Lecture 17 How to write the first message
Lecture 18 How to follow up
Lecture 19 What doesn't work
Professionals who struggle to generate outbound leads through Linkedin.,Business Owners who want to increase pipeline using Linkedin ASAP.,Junior SDR's who want to generate leads ASAP,Sales professionals who want to get meetings with ANYONE

3cdbaff7bf787326dc5fd8602f1a4561.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/6d24b33e393e08d436b1e1ba9d3aa5fc/epoed.Simplified.2023.Linkedin.Lead.Generation.For.B2B.Sales.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/7E03A2bdbDec141F/epoed.Simplified.2023.Linkedin.Lead.Generation.For.B2B.Sales.rar

nitroflare.com:
Код:
https://nitroflare.com/view/DF1839601E14D19/epoed.Simplified.2023.Linkedin.Lead.Generation.For.B2B.Sales.rar

1dl.net:
Код:
https://1dl.net/fqfezfhuiawg/epoed.Simplified.2023.Linkedin.Lead.Generation.For.B2B.Sales.rar
 

mitsumi

New Member

e5b40c1b2bbc084cd7a078312b9e68a3.jpeg

Site Design and Coordination in Revit
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 10h 53m | 4.44 GB
Genre: eLearning | Language: English

Site Modeling, Settings and Workflow​

Basic Topo Modeling
Modeling the site can be quite challenging in Revit. The tools can seem quite easy to use, but limiting and lacking.
This is why it's all about the workflow when it comes to modeling the topography. We will cover different approaches to modeling different types of surfaces.
Generating Topo from CAD and CSV files
Apart from learning how to model regular toposurfaces you will also learn how to generate topography from different types of 3D and 2D CAD files with different types of information. Also generating toposurfaces from a CSV Points files is covered as well as how to generate points files to use.
Graphical and Visual Setup
Setting up the presentation and visual settings for topography can be challenging, this is why we will go over all settings so you can present your topography exactly how you want.
Hardscape
Landscape consists out of two parts Softscape (grass, earth, vegetation, water...) and Hardscape (paving, roads, sidewalks, concrete or stone covered surfaces...).
Modeling the Topography has it's specific tools, but what about the Hardscape. There are no tools for modeling roads, sidewalks, or just concrete and stone surfaces on your site.
This is why we will cover all possible methods of using workarounds and hacks for creating all hard surfaces on your site.

2d09e2d28eafa94a8d8b21e77d427632.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/d1aee89668c2d52fe3a88302604c6a90/vllxk.Site.Design.and.Coordination.in.Revit.part1.rar.html
https://rapidgator.net/file/9f6bfe057c2584468ba0abf1a74be2ab/vllxk.Site.Design.and.Coordination.in.Revit.part2.rar.html
https://rapidgator.net/file/7444c7b0f63c7c241c3355512d4ec220/vllxk.Site.Design.and.Coordination.in.Revit.part3.rar.html
https://rapidgator.net/file/412faccbf67b3b52c6dd1752bb0add79/vllxk.Site.Design.and.Coordination.in.Revit.part4.rar.html
https://rapidgator.net/file/64bce59c9c5593f44be314a568958a25/vllxk.Site.Design.and.Coordination.in.Revit.part5.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/Df630CbddA3a651d/vllxk.Site.Design.and.Coordination.in.Revit.part1.rar
https://uploadgig.com/file/download/2C24952a75044f8C/vllxk.Site.Design.and.Coordination.in.Revit.part2.rar
https://uploadgig.com/file/download/1Ba5cf76fb13eB3b/vllxk.Site.Design.and.Coordination.in.Revit.part3.rar
https://uploadgig.com/file/download/7ab8E8fd280164d1/vllxk.Site.Design.and.Coordination.in.Revit.part4.rar
https://uploadgig.com/file/download/E8674091ddd519f1/vllxk.Site.Design.and.Coordination.in.Revit.part5.rar

nitroflare.com:
Код:
https://nitroflare.com/view/CFFF7CDA2C1FB7A/vllxk.Site.Design.and.Coordination.in.Revit.part1.rar
https://nitroflare.com/view/17E4ADB1792BBBF/vllxk.Site.Design.and.Coordination.in.Revit.part2.rar
https://nitroflare.com/view/C5418CBCBFA4702/vllxk.Site.Design.and.Coordination.in.Revit.part3.rar
https://nitroflare.com/view/8C26A90610468FC/vllxk.Site.Design.and.Coordination.in.Revit.part4.rar
https://nitroflare.com/view/6DDF71A76A73EE1/vllxk.Site.Design.and.Coordination.in.Revit.part5.rar

1dl.net:
Код:
https://1dl.net/0nxk98hhhy99/vllxk.Site.Design.and.Coordination.in.Revit.part1.rar
https://1dl.net/f1bkefbxmj8u/vllxk.Site.Design.and.Coordination.in.Revit.part2.rar
https://1dl.net/tn2b3elukkvu/vllxk.Site.Design.and.Coordination.in.Revit.part3.rar
https://1dl.net/8mxqaislw6tu/vllxk.Site.Design.and.Coordination.in.Revit.part4.rar
https://1dl.net/beeohj645k8d/vllxk.Site.Design.and.Coordination.in.Revit.part5.rar
 

mitsumi

New Member

f775921e465abd0eb9deb802331bd82f.jpeg

Site design in Revit Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 1h 49m | 732 MB
Genre: eLearning | Language: English​

Crating a toposurface
You will learn all tools and features for creating a toposurface in Revit, either by starting from scratch or from an existing CAD or points file.

Modifying a toposurface
You will learn how to use all tools for modifying the toposurface, how add or remove earth, insert roads, building pads and much more.
Displaying a toposurface
You will learn everything you need to know about appearance, graphics and how to present it in the best possible way.

0746b7a8c52ac090183cfbe4532dd7a5.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/8a04c463bf3cab066d6a87326a1a24a1/gnlri.Site.design.in.Revit.Course.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/89015067D7022fAb/gnlri.Site.design.in.Revit.Course.rar

nitroflare.com:
Код:
https://nitroflare.com/view/F1D82FBA9355FB0/gnlri.Site.design.in.Revit.Course.rar

1dl.net:
Код:
https://1dl.net/iykm0sqoo8x1/gnlri.Site.design.in.Revit.Course.rar
 

mitsumi

New Member

2e8bce40c737be33d0c6bcae5db4a932.jpeg

Social Media Marketing Success : Engaging Your Audience
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 476.81 MB | Duration: 1h 7m

Infuse more authenticity and connection in your social media content for stronger relatioships with your audience​

What you'll learn
Adding more of you into your social media marketing
How to Boost Your Engagement in Instagram Stories for MORE Sales
How to use Stories and gamification for maximum audience engagement
How to Engage Your Way To The Top and Transform Your Social Media Presence
Requirements
You must be willing to take action on what you will learn in this course
Description
Raise your hands if you feel social media is one of your challenges in business. We know what it is like to be a business owner doing so many things and wearing so many hats and wanting a solid social media presence but either you don't know where to start or you simply don't have time for more trial and error! This is exactly why we came together and created this course for YOU!Engaging your audience on social media is actually more simple than you think and in this course, we made it our mission to support all online business owners and digital entrepreneurs create the right type of engagement with their audience on social mediaIn this course, you're going to learn:How to Add more of you into your social media marketingHow to Boost Your Engagement in Instagram Stories for MORE SalesHow to use stories and gamification for maximum audience engagementHow to Engage Your Way To The Top and Transform Your Social Media PresenceThis course is for you if you are an online entrepreneur or have any type of online business and you want to build an authentic, strong connection with your audience that leads your people to go from just "followers" to raving fans and forever customerswe're building a community of online entrepreneurs who leverage the power of social media while being authentically who they are and we would love to have you join us! Not only to learn everything that we share with you in the course, but also to connect with like-minded entrepreneurs who are on the same journey to inspire, empower, and support one another. So, if you're ready for a whole new way to look at social media, click the enroll now button and let's get you the engagement and social media presence you truly deserve.
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 Did you know this?
Section 2: Engage Your Way To The Top! - Helen Ross
Lecture 3 Engage Your Way To The Top! - Transform Your Social Media Presence
Section 3: Adding more of you into your social media marketing - Sarah PJ White
Lecture 4 Adding More Of You Into Your Social Media Marketing
Section 4: Boost Your Engagement in Instagram Stories for MORE Sales - Dianne Shelton
Lecture 5 Boost Your Engagement in Instagram Stories for MORE Sales - Dianne Shelton
Section 5: Stories + gamification: The magic mix - Kenz Soliman
Lecture 6 Stories and gamification for maximum audience engagement
Section 6: Your next steps
Lecture 7 Here are your next most important steps
Lecture 8 Bonus lecture
This course is for you if you use social media for any online or offline business

9b41c4421c6656da5cb60471a3b4c5c6.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/49602680df06cec5b827d0f46b0588f1/dhace.Social.Media.Marketing.Success..Engaging.Your.Audience.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/Cb8786e2801Ec9d8/dhace.Social.Media.Marketing.Success..Engaging.Your.Audience.rar

nitroflare.com:
Код:
https://nitroflare.com/view/2E0306331CC7E82/dhace.Social.Media.Marketing.Success..Engaging.Your.Audience.rar

1dl.net:
Код:
https://1dl.net/go9eeodqsh3d/dhace.Social.Media.Marketing.Success..Engaging.Your.Audience.rar
 

mitsumi

New Member

f64777bb42e624241669be125613b247.jpeg

Solving Business Problems
Duration: 36m | .MP4 1280x720, 30 fps(r) | AAC, 48000 Hz, 2ch | 271 MB
Level: Beginner | Genre: eLearning | Language: English​

View Mike's LinkedIn NewsletterDo you have a business problem that you are having trouble solving? Mike Figliuolo has a simple five-step process for solving problems and leading your business through everyday uncertainty and larger change initiatives. Learn to pin the problem down and define it, generate possible solutions, determine the best solution, and create a clear recommendation to solve your particular challenge. This is the same process Mike has taught multibillion-dollar companies to solve their business problems. Learn how to use it to solve your own.

b9e3ace118982cef99583c9ada60aab1.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/09f8fecfa6090d66baeea62bdcbd3e87/siqzp.Solving.Business.Problems.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/60766a5841aBb67f/siqzp.Solving.Business.Problems.rar

nitroflare.com:
Код:
https://nitroflare.com/view/1991C9C52FF8048/siqzp.Solving.Business.Problems.rar

1dl.net:
Код:
https://1dl.net/lnwi8rm9zu0k/siqzp.Solving.Business.Problems.rar
 

mitsumi

New Member

dd163d75e22ecdc12d3a7c66d686b5f8.jpeg

Stairs and Railing in Revit Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 5h 17m | 1.82 GB
Genre: eLearning | Language: English

Placing Stairs and Railings​

You will learn all of the necessary techniques, best practices and some useful tips and tricks for placing stairs and railings in you project in the most efficient and correct way.
Learn about ALL settings and parameters
After learning how to place stairs and railing we will be exploring all settings and parameters available in Revit. After this you will have a complete understanding of these complex system families .
12 Projects
After learning about everything in theory, we will test everything out on 12 small projects.
7 Stair design projects
5 Railing design projects

779188febf9907c486945bfc6599b91a.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/bab83c5273a0489aeaf31926a68795d6/fqydn.Stairs.and.Railing.in.Revit.Course.part1.rar.html
https://rapidgator.net/file/b38e087596cc3f033740da5fd4b69f39/fqydn.Stairs.and.Railing.in.Revit.Course.part2.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/a17392b6C7fE118D/fqydn.Stairs.and.Railing.in.Revit.Course.part1.rar
https://uploadgig.com/file/download/1f4253a085275f5F/fqydn.Stairs.and.Railing.in.Revit.Course.part2.rar

nitroflare.com:
Код:
https://nitroflare.com/view/A0DACDC87E5B38B/fqydn.Stairs.and.Railing.in.Revit.Course.part1.rar
https://nitroflare.com/view/6E1DB8AE227A819/fqydn.Stairs.and.Railing.in.Revit.Course.part2.rar

1dl.net:
Код:
https://1dl.net/sjkl61tr53n9/fqydn.Stairs.and.Railing.in.Revit.Course.part1.rar
https://1dl.net/uyu1jcfmy5my/fqydn.Stairs.and.Railing.in.Revit.Course.part2.rar
 

mitsumi

New Member

783c8c8dce15205dd95ecbb226468379.jpeg

Structural Steel Fabrications in Revit Course
Structural Steel Fabrications in Revit Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 4h 10m | 1.41 GB
Genre: eLearning | Language: English

Modeling the structure​

You will learn how to use all structure tools in order to create any type of complex structures in Revit.
Structural connections
After creating the structure you will learn everything you need to know about using, modifying or creating structural connections using the Steel tab.
Project documentation
In the end producing all necessary project documentation is important, that is why this course covers: annotation, details, schedules and more.

2a2af42ea0642532c5abd3414b7369a8.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/a6b9be3fb2e6b876af79ae67900e3341/vvaum.Structural.Steel.Fabrications.in.Revit.Course.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/bBaE9475Bf79e6F3/vvaum.Structural.Steel.Fabrications.in.Revit.Course.rar

nitroflare.com:
Код:
https://nitroflare.com/view/8A8736EBAE2BBBD/vvaum.Structural.Steel.Fabrications.in.Revit.Course.rar

1dl.net:
Код:
https://1dl.net/v8lrizeg4air/vvaum.Structural.Steel.Fabrications.in.Revit.Course.rar
 

mitsumi

New Member

e9a8b07e5533c5a4647c39d9da399ffd.jpeg

Tekla Structures Steel Project Based Training Course-3
Published 6/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 4.17 GB | Duration: 6h 38m

Tekla Structures Advanced Oil & Gas Pipe Rack Module and Stick Built Project Based Training for All Level Students.​

What you'll learn
To learn Grid and View Creation
To learn Beams and Column Creation
To learn Beam to Beam Welded Connection with Edge Preparation
To learn Bracing and Gusset Connection Creation
To learn Column to Beam and Beam to Beam Bolt connection
To learn General Arrangement, Assembly and Single Part Drawing Creation
To learn Report Creation
To learn NC File Creation
Requirements
Basic Knowledge of Engineering
Laptop / Computer (With Tekla Structure 2020 or 2021 or 2022 Software)
Description
Tekla Structures world No:1 Building Information Modeling (BIM) Software. Tekla Structures used to create steel, reinforced concrete design and detail engineering activities for various industry. You can Create accurate 3D Model with all engineering data it can built any kind of structures in this Software.You can get knowledge to create oil and gas Industrial steel pipe rack structure project in this CourseYou will learn to create grid and its viewsYou will learn to create beam in various levelYou will learn to create beam to beam welded connection with edge preparation for butt weld and bolted connectionsYou will learn to create columnYou will learn to create base plate with anchor boltYou will learn to create column and beam splice connectionYou will learn to create pipe bracing and it's gusset plate connectionYou will learn to create pad eye designYou will learn to create column to beam stub connectionsYou will learn to create clash check and resolve the clashYou will learn to create numberingYou will learn to create general arrangement drawing (GA) and detailing You will learn to create assembly drawing and detailingYou will learn to create single part drawing and detailingYou will learn to create revision and print drawingYou will learn to create report (Assembly List, Part List, Assembly Part List, Bolt List, Shipping List, Material Excel List)You will learn to convert xsr file to xls file in reportYou will learn to create NC file for plate and beamYou will learn to work with profile catalog, material catalog and bolt catalogYou will learn to create accurate output files for fabrications and ExecutionAfter this course you will get knowledge to work Any Steel IndustryDon't wait, Let's Start your good Steps your lifeBest of Luck
Overview
Section 1: Introduction
Lecture 1 Course Introduction
Lecture 2 Download Resources and Change Video Speed
Section 2: Modeling- (Module & Stick Built)
Lecture 3 Start New Project
Lecture 4 Create Grid and Views
Lecture 5 Create Footing
Lecture 6 Create Column
Lecture 7 Create Base Plate Connection
Lecture 8 Create Column to Column Joining Plates Connection
Lecture 9 Create Beam and Pipe at EL 6200
Lecture 10 Create Beam and Pipe at EL 7100
Lecture 11 Create Beam and Pipe at EL 10750
Lecture 12 Create Stub Column and Pipe
Lecture 13 Create Vertical Bracing
Lecture 14 Create Column to Beam Bolted Stub Connection EL.+6200
Lecture 15 Create Column to Beam Welded Connection EL.+6200
Lecture 16 Create Beam to Beam Bolted Connection EL.+6200
Lecture 17 Create Bolted Gusset Connection for Vertical Bracing Base Level
Lecture 18 Create Bolted Gusset Connection for Vertical Bracing EL.+6200
Lecture 19 Create Bolted Gusset Connection for Horizontal Bracing EL.+6200
Lecture 20 Create Welded Gusset Connection for Vertical Bracing at Base
Lecture 21 Create Welded Gusset Connection for Vertical Bracing at EL.+6200
Lecture 22 Create Column to Beam Welded Connection EL.+7100 and 10750
Lecture 23 Create Column to Beam Welded Connection with flange Plate Part-1
Lecture 24 Create Column to Beam Welded Connection with flange Plate Part-2
Lecture 25 Modify Custom Component
Lecture 26 Create Beam to Beam Welded Connection EL.+7100 and 10750
Lecture 27 Create Welded Gusset Connection for Horizontal Bracing Part-1
Lecture 28 Create Welded Gusset Connection for Horizontal Bracing Part-2
Lecture 29 Create Welded Gusset Connection for Horizontal Bracing Part-3
Lecture 30 Create Welded Gusset Connection for Horizontal Bracing Part-4
Lecture 31 Create Welded Gusset Connection for Horizontal Bracing Part-5
Lecture 32 Create stub Column Welded connection
Lecture 33 Create Welded Gusset Connection for Vertical Bracing Part-1
Lecture 34 Create Welded Gusset Connection for Vertical Bracing Part-2
Lecture 35 Create Pad Eye
Lecture 36 Create beam flange edge preparation
Lecture 37 Create beam web edge preparation
Lecture 38 Check Assembly Main Part and Assembled Parts
Section 3: Model Check and Numbering
Lecture 39 Clash Check
Lecture 40 Create Numbering
Lecture 41 Check Assembly List
Lecture 42 Check Part List
Section 4: General Arrangement Drawing (Detailing)
Lecture 43 Create 3D GA Drawing
Lecture 44 Create GA Plan View Drawing
Lecture 45 Create GA Grid Elevation View Drawing
Lecture 46 Create Detail and Sectional View
Lecture 47 Change Drawing Title and Project Information
Lecture 48 Add Revision to GA Drawing
Lecture 49 Print GA Drawing
Section 5: Assembly Drawing (Detailing)
Lecture 50 Create Fabrication Drawing (Assembly and Single Part Drawing)
Lecture 51 Edit Anchor bolt Assembly Drawing
Lecture 52 Edit Beam Assembly Drawing
Lecture 53 Edit Frame Assembly Drawing
Lecture 54 Edit Horizontal Bracing Assembly Drawing
Lecture 55 Edit Pipe rack module Part-1
Lecture 56 Edit Pipe rack module Part-2
Lecture 57 Edit Pipe rack module Part-3
Lecture 58 Add Revision to Assembly Drawing
Lecture 59 Print Assembly Drawing
Section 6: Single Part Drawing (Detailing)
Lecture 60 Edit Single Part Drawing
Lecture 61 Add Revision to Single Part Drawing
Lecture 62 Print Single Part Drawing
Section 7: Report
Lecture 63 Create Assembly List
Lecture 64 Create Part List
Lecture 65 Create Assembly Part List
Lecture 66 Create Bolt List
Lecture 67 Create Material Excel List For BOQ
Lecture 68 Create Assembly Shipping List
Lecture 69 Convert xsr File to xls
Section 8: NC File
Lecture 70 Create NC File For Plate
Lecture 71 Create NC File For Beam
Tekla structure beginners,Tekla structure advanced learners,Structural Modeler,Structural Detailer,Structural Designer,Structural Draftsman,Civil Draftsman,Civil Engineers,Mechanical Engineers,Anyone Interested in Steel Structure,Anyone Interested in Civil Engineering,Anyone Interested in Skid Structure,Anyone Interested in Tekla Structures

b5dc48c7ee68fc3e68dff5520ffa14fb.jpeg

Download link

rapidgator.net:
Код:
https://rapidgator.net/file/d79097df6dc3d7ea771b03830eb0790d/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part1.rar.html
https://rapidgator.net/file/2fd4b68ff604bc9c71ce0d02091b424d/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part2.rar.html
https://rapidgator.net/file/cfe12d52207094866c8fcbc821db33fb/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part3.rar.html
https://rapidgator.net/file/5b6e58e1bc555d4894c3bc63f9ee449e/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part4.rar.html
https://rapidgator.net/file/c786c6f3e753833e363ac04d31879844/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part5.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/0Eb8933403e018FA/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part1.rar
https://uploadgig.com/file/download/Ad56AD9843A9ef69/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part2.rar
https://uploadgig.com/file/download/3B46f2d435b47f28/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part3.rar
https://uploadgig.com/file/download/1a98658d33c3e4B6/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part4.rar
https://uploadgig.com/file/download/4f10e290d8d4b23c/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part5.rar

nitroflare.com:
Код:
https://nitroflare.com/view/86466D42297CF53/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part1.rar
https://nitroflare.com/view/10DA7A93C8D4859/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part2.rar
https://nitroflare.com/view/6913BCEAC787F4F/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part3.rar
https://nitroflare.com/view/F01A793C1B8B48E/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part4.rar
https://nitroflare.com/view/08BE1FE54C3DD48/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part5.rar

1dl.net:
Код:
https://1dl.net/gl8ygb8d94re/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part1.rar
https://1dl.net/k9d8xfmnl42d/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part2.rar
https://1dl.net/ab866mcg1f46/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part3.rar
https://1dl.net/1e98pzt9xef4/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part4.rar
https://1dl.net/a617re02g9ah/sgvds.Tekla.Structures.Steel.Project.Based.Training.Course3.part5.rar
 

mitsumi

New Member

09c8a3559e6b01bb00c17833bf60a94d.jpeg

Template Creation in Revit Course
MP4 | Video: h264, yuv420p, 1920x1080 | Audio: aac, 44100 Hz | Duration: 3h 16m | 952 MB
Genre: eLearning | Language: English

Explore all options and settings for templates in Revit​

This course goes over every setup and option that can be edited for creating your own custom template. No matter what kind of template are you creating and what type of projects are you usually forking on, this course covers it all.
Learn about all tips and tricks along the way

When it comes to working in Revit there are always some ways of saving time or finding an alternative solution. I will share all of my template creation tips and tricks.
My personal preferences

I have certain preferences and settings that have saved me a lot of time over the years and have improved my workflow. In this course you will find out about them!

rapidgator.net:
Код:
https://rapidgator.net/file/b053baa26f8e572b524259d15abc28fa/bgrwl.Template.Creation.in.Revit.Course.rar.html

uploadgig.com:
Код:
https://uploadgig.com/file/download/5A2ed49b2Aef3C05/bgrwl.Template.Creation.in.Revit.Course.rar

nitroflare.com:
Код:
https://nitroflare.com/view/E914B9A6BBD9457/bgrwl.Template.Creation.in.Revit.Course.rar

1dl.net:
Код:
https://1dl.net/zgz9y96mkaso/bgrwl.Template.Creation.in.Revit.Course.rar
 
Сверху Снизу